Rate this post

Topic : How To Do HP Envy 7640 Hardware Setup And Installation

How To Do HP Envy 7640 Hardware Setup And Installation USA 2021How To Do HP Envy 7640 Hardware Setup And Installation USA 2021

First, take the printer out of its box, remove all plastic materials, and cover the printer and scanner cover. Next, connect one end of the power cord to the back of the printer and the other end to the power source. After connecting the power cord, turn on the printer by pressing the power button on the left side of the printer.

After turning on the printer, noise may be generated during the HP Envy 7640 driver configuration process. You can also set the preferred language, country, date, and time using the up / down arrows. Then, the printer display might also prompt you to install the ink cartridges. Next, lift open the ink cartridge access door, and install the tri-color cartridge on the back cover of the cartridge. Next, use the orange pull-tab to remove the tape covering the electrical contact and the ink nozzles.

How To Do HP Envy 7640 Hardware Setup And Installation USA 2021

Next, lift the lock lever for the tri-color cartridge. Next, gently slide the tri-color cartridge toward its slot and ensure that the cartridge is properly seated in the locking lever. After that, close the locking lever. Now, do the same process to place the black cartridge, Lastly, close the ink cartridge access door and the printer will automatically find the original HP cartridge installed.

A confirmation message appears on the printer control panel 123.hp.com/envy7640. Then press “OK” to continue the process. After installing the ink cartridges, load paper into the paper tray designed with different sizes of paper and slide the tray inside. 123.hp.com/envy7640 will automatically print an alignment page.

 HP Envy 7640 Printer Alignment

After receiving the printed page, place the paper down toward the scanner glass under the HP Envy 7640 driver and the software cover/scanner cover based on the instructions on the paper.

Cover the scanner cover after placing the printed paper on the scanner, the printer display may ask if it will continue scanning. Start the scanning process by selecting OK. The alignment page will be scanned and an “Aligned Successfully” message appears on the printer control panel. Choose OK to continue the process. You can set your printer on a wireless connection either using the software included with the printer or the standalone printer itself.

HP Envy 7640 Driver and Software Print Setup for Windows

Load a stack of paper into the input tray. You can get more information from Load Media. Then select Print from the file list in the software application. You can also change basic settings by opening the properties dialog. Depending on the HP Envy 7640 driver and software, the setup process and software will differ depending on the printer you are using.

After installing the HP Envy 7640 printer, select 123.hp.com/envy7640 Printer Preferences from Printer Setup. After that, choose your print job from the list of print shortcuts, and now the default preset settings for the shortcuts will be displayed. Learn more about printer preferences at 123.hp.com/envy7640. You can also customize the HP Envy 7640 driver and software settings as print shortcuts.
You can also delete the shortcut easily by selecting the shortcut and selecting Delete. Then, after selecting the settings, you can select the printing process by clicking OK.